Released 2-09-11.  Original release of module, SLIM-RFA-1 Rev 0.

SLIM-RFA-1, Dual Buffer Amplifier, size-A
Use your mouse's "right click" and "Save Link" to download:
a.  SKSLIM-RFA-1 rev 0 Schematic, in ExpressPCB software.
b.  LAYSLIM-RFA-1 rev 0 Layout, in ExpressPCB software. Use for locating parts on board.
c.  PWB-RFA, PWB artwork, in ExpressPCB software. Use for ordering from Express.
d.  PLSLIM-RFA-1 rev 0, Parts List in text format.

    The SLIM-RFA-1 is a Dual Amplifier, designed for frequencies between 1 GHz and 2 GHz. Each Buffer Amplifier will provide approximately 0 dB gain. The main purpose of the amplifier is not to provide gain, but reverse isolation. The reverse isolation (S12) should be about -38 dB. This module was developed with the PWB-RFA as the core design. Click to see the PWB-RFA Web Page.
    It should be noted that this buffer amplifier was designed with the intention of using the MMIC Amplifier (U1 or U2) in saturation, (it is not operated within its linear region). Its output is intended to drive a mixer's L port. For linear operation, the input signal should have a maximum power level of +4 dBm.
SLIM-RFA-1 Schematic